DLLDOWNLOADSYSTEM

Missing dll error solution

Please read the instructions carefully before you download the dll file.Take the proper steps to safely clean and repair windows errors.

1. Where should this file go? After you download "*.Dll" on your machine, paste it in directory where it missing, and also copy it to

Windows 95, 98, ME C:\Windows\System
Windows NT, 2000 C:\WinNT\System32
Windows XP, Vista, 7, 8 C:\Windows\System32
64-bit Windows C:\Windows\System64

If you can't find windows directory try:
a. Press and hold Windows key on your keyboard, then press button R.
b. Enter the command "cmd" and press Enter
c. In a command window enter the command "set systemroot" and press Enter. It will display system directory.
2. Go to "start" ==> "run" and type "regsvr32 *.Dll" to register the file to the system.

    
File Information
  • Nameusb2.inf (usb2.inf)
  • CategoryOperating System > inf
  • Description

    ; Copyright 2001
    ; Microsoft Corporation
    ; USB2.INF
    ; USB 2.0 Add-On Driver support
    ; For Windows 2000 and Windows XP
    ;

    [Version]
    signature="$Windows NT$"
    Class=USB
    ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
    Provider=%Msft%
    DriverVer=06/01/2001,5.1.2600.0            ;Keep date prior to XP INF date
    CatalogFile=USB2.CAT

    [SourceDisksNames]
    1=%Distribution%,usbehci.sys,,

    [SourceDisksFiles]
    usbehci.sys = 1
    usbport.sys = 1
    usbhub20.sys = 1
    ;usb2rn.doc = 1
    hccoin.dll = 1

    [ControlFlags]
    ExcludeFromSelect = *

    [DestinationDirs]
    DefaultDestDir=11               ; LDID_SYS
    ;
    ; For Windows NT, all drivers go into %windir%\system32\drivers.  Since
    ; there isn't a DIRID (LDID) that represents this path on both NT and Win95,
    ; we specify the relative path off of %windir%.
    ;
    EHCI.CopyFiles.NT         = 10, system32\drivers
    USB.CopyFiles.NT          = 10, system32\drivers
    USBUI.CopyFiles.NT        = 11
    HUB20.CopyFiles.NT        = 10, system32\drivers
    HUB.CopyFiles.NT          = 10, system32\drivers
    USBHCCOIN.CopyFiles.NT    = 11

    ; =================== Table of content =========================
    ; note that these are in alphabetical order
    ;

    [Manufacturer]
    %Generic%=Generic, NTx86.5.1
    %Intel%=Intel, NTx86.5.1
    %NEC%=NEC, NTx86.5.1
    %VIA%=VIA, NTx86.5.1

    ; --------------------------------------------------------------
    ; EHCI
    ; --------------------------------------------------------------

    ; For Windows XP...
    [EHCIXP]
    Include=machine.inf
    Needs=NO_DRV

    [EHCIXP.Services]
    DelService = usbhub20
    Include=machine.inf
    Needs=NO_DRV.Services


    ; For Windows 2000...
    [EHCI.NT]
    AddReg=EHCI.AddReg.NT
    CopyFiles=EHCI.CopyFiles.NT,USBUI.CopyFiles.NT,USB.CopyFiles.NT
    DelFiles=USB.DelFiles.NT

    [EHCI.AddReg.NT]
    HKR,,EnumPropPages32,,"usbui.dll,USBControllerPropPageProvider"
    HKR,,Controller,1,01


    [EHCI.CopyFiles.NT]
    usbehci.sys
    usbport.sys

    [EHCI.NT.Services]
    AddService = usbehci, 0x00000002, EHCI.AddService

    [EHCI.AddService]
    DisplayName    = %EHCIMP.SvcDesc%
    ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
    StartType      = 3                  ; SERVICE_DEMAND_START
    ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %12%\usbehci.sys
    LoadOrderGroup = Base

    [EHCI.NT.CoInstallers]
    CopyFiles=USBHCCOIN.CopyFiles.NT
    AddReg=EHCI.NT.CoInstallers_AddReg

    [EHCI.NT.CoInstallers_AddReg]
    HKR,,CoInstallers32,0x00010000,"hccoin.dll,HCCOIN_Entry"

    ;Keep this section to tell the coinstall what files to copy during WU install
    [USB2COINSTALLER]
    usbehci.sys
    usbport.sys
    usbhub20.sys
    hccoin.dll

    ; --------------------------------------------------------------
    ; USB ROOT HUB (USB 2.0)
    ; --------------------------------------------------------------

    [ROOTHUB2.NT]
    CopyFiles=HUB20.CopyFiles.NT
    DelFiles=HUB20.DelFiles.NT,USBINF.DelFiles.NT,USBMON.DelFiles.NT
    AddReg=ROOTHUB2.AddReg.NT

    [ROOTHUB2.AddReg.NT]
    HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"

    [ROOTHUB2.NT.Services]
    AddService = usbhub20, 0x00000002, ROOTHUB2.AddService

    [ROOTHUB2.AddService]
    DisplayName    = %ROOTHUB2.SvcDesc%
    ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
    StartType      = 3                  ; SERVICE_DEMAND_START
    ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %12%\usbhub20.sys
    LoadOrderGroup = Base

     

    ; --------------------------------------------------------------
    ; USB 2.0 Hub Support
    ; --------------------------------------------------------------

    ; For Windows NT...

    [Usb2Hub.Dev.NT]
    CopyFiles=HUB20.CopyFiles.NT
    DelFiles=HUB20.DelFiles.NT,USBINF.DelFiles.NT,USBMON.DelFiles.NT
    AddReg=Usb2Hub.AddReg.NT

    [Usb2Hub.AddReg.NT]
    ;; bugbug this may have to change for 2.0 ui
    HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"

    [Usb2Hub.Dev.NT.Services]
    AddService = usbhub20, 0x00000002, Usb2Hub.AddService

    [Usb2Hub.AddService]
    DisplayName    = %Hub2.SvcDesc%
    ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
    StartType      = 3                  ; SERVICE_DEMAND_START
    ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %12%\usbhub20.sys
    LoadOrderGroup = Base


    ; =================== GENERIC ===================================
    [Generic]
    %PCI\CC_0C0320.DeviceDesc%=EHCI,PCI\CC_0C0320
    %USB\ROOT_HUB20.DeviceDesc%=ROOTHUB2,USB\ROOT_HUB20
    ; 2.0 HUBs
    %USB\HubClass.DeviceDesc%=Usb2Hub.Dev,USB\HubClass

    [Generic.NTx86.5.1]
    %PCI\CC_0C0320.DeviceDesc%=EHCIXP,PCI\CC_0C0320
    ; use usbhub.sys on the system for Windows XP
    ;%USB\ROOT_HUB20.DeviceDesc%=ROOTHUB2XP,USB\ROOT_HUB20


    ; =================== NEC ==================================
    [NEC]
    ; for Windows 2000
    %PCI\VEN_1033&DEV_00E0&REV_01.DeviceDesc%=EHCI,PCI\VEN_1033&DEV_00E0&REV_01
    %PCI\VEN_1033&DEV_00E0&REV_02.DeviceDesc%=EHCI,PCI\VEN_1033&DEV_00E0&REV_02


    [NEC.NTx86.5.1]
    ; for Windows XP
    %PCI\VEN_1033&DEV_00E0&REV_01.DeviceDesc%=EHCIXP,PCI\VEN_1033&DEV_00E0&REV_01
    %PCI\VEN_1033&DEV_00E0&REV_02.DeviceDesc%=EHCIXP,PCI\VEN_1033&DEV_00E0&REV_02


    ; =================== INTEL ===================================
    [Intel]
    %PCI\VEN_8086&DEV_24CD.DeviceDesc%=EHCI,PCI\VEN_8086&DEV_24CD

    [INTEL.NTx86.5.1]
    %PCI\VEN_8086&DEV_24CD.DeviceDesc%=EHCIXP,PCI\VEN_8086&DEV_24CD


    ; =================== VIA ===================================
    [VIA]
    %PCI\VEN_1106&DEV_3104.DeviceDesc%=EHCI,PCI\VEN_1106&DEV_3104

    [VIA.NTx86.5.1]
    %PCI\VEN_1106&DEV_3104.DeviceDesc%=EHCIXP,PCI\VEN_1106&DEV_3104


    ; =================== Global ==================================

    [USB.CopyFiles.NT]

    [USB2DOC.CopyFiles.NT]
    ;usb2rn.doc

    [HUB.CopyFiles.NT]
    ; use usbhub.sys on the system

    [HUB.DelFiles.NT]
    ; use usbhub.sys on the system

    [HUB20.CopyFiles.NT]
    usbhub20.sys

    [HUB20.DelFiles.NT]
    usbhub20.sys

    [USB.DelFiles.NT]
    usbhub20.sys,,,1
    openhci.sys,,,1
    usbohci.sys,,,1
    usbport.sys,,,1
    uhcd.sys,,,1
    usbd.sys,,,1
    usbcamd.sys,,,1
    imagecls.sys,,,1
    hcd.vxd,,,1
    usbd.vxd,,,1
    usb_enum.vxd,,,1
    vtaishid.vxd,,,1
    tmusb.sys,,,1
    taishid.sys,,,1
    usbuidll.dll,,,1

    [USBMON.DelFiles]
    mondrv.sys,,,1
    mondll.dll,,,1

    [USBMON.DelFiles.NT]
    mondrv.sys,,,1
    mondll.dll,,,1

    [USBINF.DelFiles]

    [USBINF.DelFiles.NT]

    [USBUI.CopyFiles.NT]
    ;usbui.dll

    [USBHCCOIN.CopyFiles.NT]
    hccoin.dll

    ;------------------------------------------ cut here ---------------------------

    [Strings]
    Distribution="USB 2.0 (EHCI) Driver Disk"
    Msft="Microsoft"
    USBClassName="Universal Serial Bus controllers"

    EHCIMP.SvcDesc="Microsoft USB 2.0 Enhanced Host Controller Miniport Driver"

    Generic="(Standard USB Host Controller / Hub)"
    Intel="Intel"
    NEC="NEC"
    VIA="VIA"

    PCI\VEN_1033&DEV_00E0&REV_01.DeviceDesc="NEC PCI to USB Enhanced Host Controller B0"
    PCI\VEN_1033&DEV_00E0&REV_02.DeviceDesc="NEC PCI to USB Enhanced Host Controller B1"

    PCI\VEN_8086&DEV_24CD.DeviceDesc="Intel PCI to USB Enhanced Host Controller"

    PCI\VEN_1106&DEV_3104.DeviceDesc="VIA PCI to USB Enhanced Host Controller"

    PCI\CC_0C0320.DeviceDesc="Standard Enhanced PCI to USB Host Controller"

    USB\ROOT_HUB20.DeviceDesc="USB 2.0 Root Hub"
    USB\HubClass.DeviceDesc="Generic USB Hub"

    ROOTHUB.SvcDesc="USB Root Hub (usbport)"
    ROOTHUB2.SvcDesc="USB 2.0 Root Hub Support"
    Hub2.SvcDesc="USB Hub Support"

  • Filenameusb2.zip
  • Filesize2.77 kB
  • Filetypezip (Mime Type: application/zip)
  • Rating 4.7 / 5 , 2535 rating
  • MD5: 397073898300a8beb4dd673281223a3e
  • SHA1: 51cfaa3434526d7aa5cb915bc7955ef41d5a968a
  • SHA265: $5$rounds=5000$dlldownloadsyste$epWFn1Kz0Lv33cI350XyfDZJy8xKbQXDIuiCLfgUwP0


Join the Discussion:



Popular Dlls:


Need Help? Find us at facebook

All possible solutions

Got computer error message like:

"dll crash"
"bad image"
"error loading"
"Dll was not found"
"the procedure entry point Dll error"
"Dll could not be located"
"Access Violation"
"Cannot register Dll"

at startup or shutdown or run program?
No "missing dll" anymore - Repair dll errors - How to fix windows dll corrupt on your windows xp,vista,2000/2003,win7, win8,win10

  • Download and install dll.
  • Download and install the latest update.
  • Install windows updates automatically/regularly, allow Windows check updates in the background.
  • Reinstall the application.