[general]
; if ShowDevices exists and is non-zero then will display wave out devices and other stuff
;
; ShowDevices=0 : default
; ShowDevices=1 : show output from waveOutGetDevCaps
ShowDevices=0
; if WaveOutDevice exists it should be between zero and one less num devices
; the default is WAVE_MAPPER
;
; WaveOutDevice=0 : use the first device (default)
; WaveOutDevice=1 : use the second device
; WaveOutDevice=-1: use WAVE_MAPPER (will use [Unknow Device] setttings)
;
;
WaveOutDevice=-1
; Wavemix will detect if it is running on a 286 and not use any 386 instructions
; you can force it to use the 286 only code on a 386 by setting cmixit=1
; cmixit=0 (default)
; cmixit=1 uses only 286 code (even on a 386 or >)
[WinNT:default]
; Remix=1 = ResetRemix()
; Remix=2 = NoResetRemix()
; default=1
Remix=1
; GoodWavePos=0 = uses timeGetTime() (default)
; GoodWavePos=1 = uses waveOutGetPosition()
GoodWavePos=0
; WaveBlocks=# (2<=#<=6) the number of ping pong buffers to use
; default=3
WaveBlocks=3
; WaveBlockLen=# min = 512 max = 4096
; if a number is not specified Wavemix.dll will try to determine a size
;
; SamplesPerSec=11 (11.025 Khz) (default)
; =22 (22.04 KHz)
; =44 (44.1 KHz)
SamplesPerSec=11
[WinNT:Windows Sound System Playback]
; Need to set do11khzmce=FALSE in system.ini->[sndsys.drv] if want to use Remix=1 and SamplesPerSec=11
Remix=1
GoodWavePos=1
WaveBlocks=4
SamplesPerSec=22
;WaveBlockLen=
[WinNT:MultiSound Wave Out]
Remix=2
GoodWavePos=1
WaveBlocks=3
;WaveBlockLen=
[WinNT:SB16 Wave Out]
Remix=1
GoodWavePos=0
WaveBlocks=5
SamplesPerSec=22
;WaveBlockLen=
[WinNT:SBPro Wave Out]
Remix=1
GoodWavePos=0
WaveBlocks=5
;WaveBlockLen=
[WinNT:Media Vision Waveform Output]
Remix=1
GoodWavePos=0
WaveBlocks=4
;WaveBlockLen=
[WinNT:MVI Pro Audio/CDPC Wave Output]
Remix=1
GoodWavePos=0
WaveBlocks=4
;WaveBlockLen=
[WinNT:UltraSound Waveform Output]
Remix=2
GoodWavePos=0
WaveBlocks=3
SamplesPerSec=11
[not compatible]
; sound drivers that are not compatible with wavemix can be added here
; (the =1 is necessary). One of the major conflicts occur with the PC Speaker
; drivers. The wavemix.dll will only work with devices that support asynchronous
; operation - most of the pc speaker drivers are synchronous. The name of the devices
; can be easily seen by setting ShowDevices=1 in the [general] section and then running
; a program which uses the wavemixer. One major problem with some of the pc speaker
; drivers is that they report that they are asynchronous when they are really not.
Wave driver for PC Speaker=1
; Windows 2000 USB Modem Setup File
; Copyright (c) 2003 Motorola Inc.
; Manufacturers: Motorola
[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Motorola%
LayoutFile=layout.inf
DriverVer=10/02/2003, 2.1.0.1
[Manufacturer]
%Motorola% = Motorola
[Motorola]
%USBCDMA% = USBCDMA, USB\VID_22B8&PID_0005
%USBPATRIOT% = USBPATRIOT, USB\VID_22B8&PID_1005
%USBLCA% = USBLCA, USB\VID_22B8&PID_3802
%USB1XCDMA% = USB1XCDMA, USB\VID_22B8&PID_2805
%USB1XCDMA5100% = USB1XCDMA5100, USB\VID_22B8&PID_2822
%USBTALON% = USBTALON, USB\VID_22B8&PID_3002
%USBTALON% = USBTALON, USB\VID_22B8&PID_6102
%USBHELEN% = USBHELEN, USB\VID_22B8&PID_4002
%USBNEPTUNELTS% = USBNEPTUNELTS, USB\VID_22B8&PID_4802
%USBEZX% = USBEZX, USB\VID_22B8&PID_6002
%USBNEPTUNEULS% = USBNEPTUNEULS, USB\VID_22B8&PID_5802
%USBNEPTUNELTE% = USBNEPTUNELTE, USB\VID_22B8&PID_4902
%USBNEPTUNELTX% = USBNEPTUNELTX, USB\VID_22B8&PID_4A02
%USBMSM6050% = USBMSM6050, USB\VID_22B8&PID_2A02
%USBMSM6100% = USBMSM6100, USB\VID_22B8&PID_2A22
%USBMSM6300% = USBMSM6300, USB\VID_22B8&PID_2A42
[USBCDMA.NT]
AddReg=All, MDMSettings, MDMResponse, CDMAspecific
CopyFiles=USBsys32Drivers
[USBPATRIOT.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBLCA.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USB1XCDMA.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USB1XCDMA5100.NT]
AddReg=All, MDM1XSettings, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBTALON.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBHELEN.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBNEPTUNELTS.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBEZX.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBNEPTUNEULS.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBNEPTUNELTE.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBNEPTUNELTX.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBMSM6050.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBMSM6100.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[USBMSM6300.NT]
AddReg=All, MDMSettings, MDMResponse
CopyFiles=USBsys32Drivers
[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR,,PortSubClass,1,02
HKR,,DeviceType,1,02
HKR,,PortDriver,0,3ccport.vxd
HKR,,Contention,,
[MDM1XSettings]
HKR,,MaximumPortSpeed, 1, 00, 84, 03, 00
HKR,, DCB, 1, 1C,00,00,00, 00,84,03,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,, FClass, 1, c3,00,00,00
HKR, Fax, CL1FCS,, "2"
HKR, Fax, HardwareFlowControl,, "1"
[MDMSettings]
HKR,, Properties, 1, 08,01,00,00, FF,00,00,00, FF,00,00,00, 07,00,00,00, 0F,00,00,00, FF,03,00,00, 00,84,03,00, C0,DA,00,00
HKR,, InactivityScale, 1, 3c,00,00,00
HKR, Init, 1,, "ATZ
HKR, Init, 2,, "ATE1V1&D2
HKR, Answer, 1,, "ATA
HKR, Hangup, 1,, "ATHE1
HKR,, Reset,, "ATZ
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Monitor, 1,, "ATS0=0
HKR, Monitor, 2,, "None"
HKR, Settings, FlowControl_Off,, "+IFC=0,0"
HKR, Settings, FlowControl_Hard,, "+IFC=2,2"
HKR, Settings, FlowControl_Soft,, "+IFC=1,1"
[MDMResponse]
HKR, Responses, "0
HKR, Responses, "1
HKR, Responses, "2
HKR, Responses, "3
HKR, Responses, "4
HKR, Responses, "6
HKR, Responses, "7
HKR, Responses, "8
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
HKR, Responses, "
[CDMAspecific]
HKR, Fax, FixModemClass,, "2.0"
HKR, Fax, HardwareFlowControl,, "1"
[Strings]
Motorola = "Motorola"
USBCDMA = "Motorola USB Modem"
USBPATRIOT = "Motorola USB Modem"
USBLCA = "Motorola USB Modem"
USB1XCDMA = "Motorola USB Modem"
USB1XCDMA5100 = "Motorola USB Modem"
USBTALON = "Motorola USB Modem"
USBHELEN = "Motorola USB Modem"
USBEZX = "Motorola USB Modem"
USBNEPTUNELTS = "Motorola USB Modem"
USBNEPTUNEULS = "Motorola USB Modem"
USBNEPTUNELTE = "Motorola USB Modem"
USBNEPTUNELTX = "Motorola USB Modem"
USBMSM6050 = "Motorola USB Modem"
USBMSM6100 = "Motorola USB Modem"
USBMSM6300 = "Motorola USB Modem"
[USBCDMA.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBPATRIOT.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBLCA.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USB1XCDMA.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USB1XCDMA5100.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBTALON.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBHELEN.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBNEPTUNELTS.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBEZX.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBNEPTUNEULS.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBNEPTUNELTE.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBNEPTUNELTX.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBMSM6050.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBMSM6100.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBMSM6300.NT.Services]
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[USBCDMA.NT.HW]
AddReg=LowerFilterAddReg
[USBPATRIOT.NT.HW]
AddReg=LowerFilterAddReg
[USBLCA.NT.HW]
AddReg=LowerFilterAddReg
[USB1XCDMA.NT.HW]
AddReg=LowerFilterAddReg
[USB1XCDMA5100.NT.HW]
AddReg=LowerFilterAddReg
[USBTALON.NT.HW]
AddReg=LowerFilterAddReg
[USBHELEN.NT.HW]
AddReg=LowerFilterAddReg
[USBNEPTUNELTS.NT.HW]
AddReg=LowerFilterAddReg
[USBEZX.NT.HW]
AddReg=LowerFilterAddReg
[USBNEPTUNEULS.NT.HW]
AddReg=LowerFilterAddReg
[USBNEPTUNELTE.NT.HW]
AddReg=LowerFilterAddReg
[USBNEPTUNELTX.NT.HW]
AddReg=LowerFilterAddReg
[USBMSM6050.NT.HW]
AddReg=LowerFilterAddReg
[USBMSM6100.NT.HW]
AddReg=LowerFilterAddReg
[USBMSM6300.NT.HW]
AddReg=LowerFilterAddReg
[LowerFilterAddReg]
HKR,,"LowerFilters",0x00010000,"usbser"
[LowerFilter_Service_Inst]
DisplayName="Motorola USB Modem Driver"
ServiceType= 1
StartType = 3
ErrorControl = 0
ServiceBinary = %12%\usbser.sys
[USBsys32Drivers]
usbser.sys,,,0x20
[DestinationDirs]
USBsys32Drivers=12
DefaultDestDir=12
; USBPORT.INF -- This file contains descriptions of all the
; USB Host Controllers that use USBPORT
; This INF file installs the Silicon Image Serial ATA Raid driver
; for the SiI 3x12 controller on systems running Windows 98/ME,
; Windows NT 4.0, Windows 2000, Windows XP, and Windows Server 2003.
Got computer error message like:
"dll crash"
"bad image"
"error loading"
"Dll was not found"
"the procedure entry point Dll error"
"Dll could not be located"
"Access Violation"
"Cannot register Dll"
at startup or shutdown or run program?
No "missing dll" anymore - Repair dll errors - How to fix windows dll corrupt on your windows xp,vista,2000/2003,win7, win8,win10